We use the products in the shower room every day. After long-term use, it is inevitable that problems will arise with the showerhead. The shower in the bathroom suddenly got blocked, what should I do? Do you still feel helpless?

Today, I will teach you three ways to disperse spray. The solution for showerhead piercing:

1. Use acupuncture and moxibustion. If your showerhead is blocked by a small hole, first let the faucet drain some water to see if the hole in between is blocked. Then you open the shower nozzle and there are many small holes on it, which is where the water comes out. Pierce the impurities in the perforation with a prepared needle until there are no impurities in the shower hole. This method is a more direct and better operational approach. Get close.

If it can be soaked in vinegar and blocked by a large number of holes, it is very difficult to pierce the holes with a needle and cannot solve the problem. I suggest you use acid dust removal to solve this problem. Prepare some white vinegar and pour it into the pot until it can be soaked with a shower. After soaking the vinegar for about 10 minutes, you can shower off the scale in the shower head.

The use of lubricating oil is more targeted at the serious problem of metal porous nozzles. Therefore, it is recommended to use WD-40 for rust prevention and corrosion. This lubricating oil has good affinity and permeability with metals, and leaves a protective film. Stop the shower. This method is more suitable for showerheads in homes that are not made of stainless steel.

Article source: Kaiping Bathroom Faucet http://www.clasito.net/