I don&# 039; T know if we have ever thought about why there are so many bubbles in the water flowing out of the faucet? Actually, this is mainly because the faucet is required with a bubble, which can make the water soft and prevent splashing

1. What is a bubble? A bubble can mix water and air thoroughly, producing a foaming effect, and then achieving the effect of reducing water consumption and saving water At present, all round faucets on the market are required with a bubble, while square and flat faucets do not have a bubble

2. The effect of a bubble Generally speaking, the home faucet device with a bubble has the following three effects 1. Filtering: A bubble can filter out some sedimentation and impurities in water 2. Water saving: A bubble can allow water and air to touch freely, creating a foaming effect, and then reducing water consumption Generally, a faucet acquired with a bubble can save about 50% of water compared to regular ones 3. Splash prevention: When water flows into the air, it benefits soft and reduces the impact force It can prevent water from splashing everywhere and also have a good noise reduction effect together

3. How to clean the bubble? As we mentioned earlier, a bubble can filter out impurities, but over time it is inevitable that it will become clogged and requires cleaning Be able to remove the other, soap it in wine, using a small brush or other tools to clean debris, and then reinstall it. Here comes a question, which is: how to disassemble the faucet absorber? Use a small screendriver to insert into the gap of the foaming machine frame and forcefully pry it open Open the plastic card top net on top and take out the stainless steel net in the center (there are four) After cleaning, install it back in the order of disassembly (the stainless steel mesh should have the burrs fixing rewards, and finally the plastic card top mesh should be installed and stuck)

The article origins from Kaiping faucet: http://www.clasito.net/