After choosing a favorite faucet, how to use and maintain it correctly is a headache and headache for many users In fact, with proper installation, use, and maintenance, the practical service life of the faucet can be extended for a long time, and it can always maintain its brightness as new

Device:

Experienced and qualified personnel should be invited to carry out the construction of the equipment When installing, the faucet should be kept away from hard objects as many as possible, and cement, glue, etc. should not be left on the surface to avoid damaging the cluster of the coating Pay attention to removing debris from the pipeline and installing a faucet

Application:

1. Various optimizations inside the pipeline should be removed during installation It can prevent valve core damage, jamming, blocking, and leakage The exterior should be cleaned together to remove any building material residues

2. For any type of faucet product, there is no need to apply exceptional force when turning it on or off, just equitably twist or toggle it. Even traditional faucets do not require a lot of effort to right Especially, do not use the handle as a handle to support or use it. After a period of use, products required with screen covers at the outlet should be requested and flushed to remove impurities Products required with hosts should pay attention to ensuring that the hosts are always in a structured condition to avoid breaking

3. The metal host of the shower head of the bathtub faucet should be in a structured condition and should not be cooked around the faucet when not in use When using or not in use, be careful not to form a dead angle at the joint between the host and the valve body to avoid breaking or damaging the host

4. Water puzzles that have not been in use for a long time may experience problems such as poor sealing, leakage, loose handle, and loose interface Generally, customers can solve these problems themselves

5. When the sealing of the spiral stable rising rubber water noise is not closed, it is usually due to hard debris getting stuck in the sealing port. When it holds, simply remove the handle (handwheel), unscrew the valve cover and core to remove impurities, and then install them as they are before normal use

6. If the sealing noise of the ceramic valve core is not closed properly, it may be due to hard fabrics scraping the sealing surface or insufficient pre tightening force applied to the valve core If it is the form, only the after sales service department or repair department of the water noise manufacturer can be contacted The latter issue only requires the user to remove the handle (handwheel) and slightly tight the valve core

7. There are generally two reasons for the loose of the handle (handboard): first, due to cohesion during installation, the handle (handboard) was not properly secured, and only the fastening screw needs to be secured The second issue is poor material selection for the handle (handwheel), which often occurs at the junction between the zinc alloy handle (handwheel) and the valve core due to precision oxidation and correction, resulting in gaps There is generally no way to make up for this So, try not to use products with zinc alloy handles (handbheels) as much as possible

8. If there is a leak at the connection part of the water puzzle, it is generally caused by the part not being secured during installation, and only needs to be secured Sometimes, a faucet is relatively small in all aspects, but there is a sense of continuous dripping after being closed At this point, it depends on the duration of dripping water, which it drips continuously, and the number of water drops A long driving time may some times continue for 4 to 5 minutes, with a total of about ten drops The amount of water dripping out is equivalent to the residual water in the south of the water noise after the water source is closed, which is a normal phenomenon

Maintenance:

1. The surface of the faucet should be gently wired with a soft cloth (without impurities) dipped in a cleaning agent Avoid using metal wire balls or scoring cloths with hard particles Additionally, do not collect with hard objects to damage the surface of the faucet

2. Use the following agents to thick the financial mask and deposits: milk liquid glass cleaner, pure liquid glass cleaner, acid free, abrasion free soft liquid or dissolved powder, conflicting free solution polishing agent

3. Do not use any conflicting cleaning agents, cloths, or paper cloths; Do not use any acidic cleaning agents, conflicting agents, or through cleaning agents

4. If the water pressure is not less than 0.02mpa (i.e. 0.2kgf/cm2) and after a period of use, if the water output decreases or even the water heat stacks, the sieve cover can be fairly unscrewed at the outlet of the faucet to remove impurities, which can generally be restored to the original state

Article source: Kaiping faucet http://www.clasito.net