1. Two Reasons for Loose Handle

a. The handle is not fixed during assembly, just right the fastening screws

b. The handle material is poor, and the connection between the zinc alloy handle and the valve core is oxidized and corroded, resulting in an increase in gap Therefore, Xiudada recommendations that users avoid using zinc alloy products as much as possible

2. Products with screen covers should be disassembled and cleaned of imports after use

For products acquired with hosts, pay attention to keeping the hosts in their natural state to prevent breakages

3. The sealing of the ceramic valve core is not tight, hats due to scratches from hard fabrics or ineffective pre tightening force of the valve core

Scratches, it is recommended to seek repair from the maintenance department for correction;

▲ Insufficient pre tightening force, the latter problem only needs to be solved by the user after removing the handle (handwheel) and slightly tightening the valve core

4. Various optimizations inside the pipeline during installation can prevent damage, blockage, and leakage of the valve core

▲ Simultaneously clean the exterior and brush off any remaining material

Article source: Kaiping Bathroom Faucet http://www.clasito.net/