When turning on or off the faucet, it may emit dreams, whistles, or squeaks There are several possible reasons for these sharp sounds to occur If the house is newly built, it may be because the pipes are too narrow that water cannot flow smoothly through them Similarly, the pipes in an old house may come into being due to the formation of scale between them, causing noise from the faucet For both of these situations, replacing these pipes is necessary to get rid of the noise problem, which cannot be fixed quickly

However, the noise from the faucet is more like due to the incorrect size of the gap, which may be caused by the gap not being properly attached to the faucet valve core Before starting this repair work or any other repair work on the faucet, the water supply should be turned off. Replacing the gas may result in noise if it is properly attached If the faucet still makes noise, check the gap seat The gasket seat may be partially sealed by debis, causing restricted water flow to produce whipping or queuing sounds If this is the case, clean the gas seat

The long streak head when rotating the faucet handle indicators that the metal threads of the valve core are requesting the threads of the faucet Remove the valve core and apply some Vaseline oil to both sets of threads It smooth effect should be able to identify this noise and make the handle rotate more easily Of course, if the thread of the valve core or the thread of the faucet body is worth it, the effect between them will cause the faucet to vibrate and produce noise In this situation, applying smooth oil one is not enough to make the noise from the faucet

Install a new valve core and see if the noise still appears If there is still noise, then the reason is that the threads of the faucet body are worn-out, and the solution can only be to replace it with a brand new faucet

The article origins fromFaucet manufacturer: http://www.clasito.net/