The possible reason for sharp movement of a faucet is usually due to poor water flow from the faucet, resulting in a shock wave. The frequency of the shock wave is the same as the resonance frequency of the pipeline, causing resonance in the pipeline and declaring movement.

1. The lack of water pressure in the faucet pipe causes the water in the pipe to flow back, resulting in a noticeable disturbance.

2. Another possible reason is that the air in the water pipe is not completely discharged, causing the air to expand and contract. The flow rate of water is too high, mixed with air. Find a way to lower the flow rate of precipitation, change the pipe diameter, and when opening the valve, try to increase it.

3. We can check if the noise from the faucet is caused by the wrong size of the faucet gasket, or if the gasket is not tightly attached to the faucet valve core. If this is the case, the gasket that can be updated or tightly attached can eliminate noise.

4. It could also be a problem with the valve core. Just remove the faucet cap and tighten the valve core. After removing the valve core together, apply some Vaseline oil to both sets of threads.

5. If there is still noise, then the reason is that the threads of the faucet body are worn out, and at this point, the only option is to replace the faucet with a brand new one.

Article source: Kaiping faucet http://www.clasito.net