The faucet is a hardware component that has been present since the availability of tap water, and it is also a household hardware component that we are now familiar with. But did you really install the right faucet at home? In fact, in many households, the equipment of faucets is not very standardized, and there are some problems to some extent. I have summarized five misconceptions. Let&s see if we have made such a mistake now?

Misconception 1: Different functional area equipment with the same type of faucet

There are various types of faucets, and according to different functional areas, there are mainly several types of faucets, including basin faucets, bathtub faucets, washing machine faucets, and sink faucets. However, the structure and function of faucets in different functional areas are different. Faucets in basin, bathtub, and bathtub generally use two types: cold and warm faucets and frother faucets. For washing machine faucets, only a single cooling faucet is needed, Because the water flow of a single cooled faucet washes out quickly, it can achieve water-saving effects.

Misconception 2: The cold and hot water pipes are not separated

In general, the cold and hot water faucet controls the mixing ratio of cold and hot water through the different opening points at both ends of the ceramic valve core, thereby regulating the water temperature. If only a cold water pipe is needed, two inlet hoses can be connected to the cold and hot water faucets of the equipment, and the corner valve on the equipment can also function.

Misconception 3: The connection between the faucet and the water pipe does not use an angle valve

When connecting the hot and cold faucets to the water pipes at home, angle valves must be used to prevent water leakage from the faucet from affecting water usage in other parts of the household. The faucet of the washing machine does not require hot water, so it can be directly connected to the water pipe.

Misconception 4: The faucet was not cleaned on time

Many households have never paid attention to the cleaning and maintenance of their faucets after installing them. Over time, not only is the water quality of the faucet not guaranteed, but it can also exhibit various malfunctions that affect its use. In fact, the accurate method is to clean the faucet every month after the equipment is installed. The surface stains and water stains can be wiped clean with a clean cloth. If thick scale accumulates inside, just pour white vinegar into the faucet pipeline to soak for a while, then open the hot water valve to drain the water.

Misconception 5: The faucet was not replaced on time

A typical faucet can be considered for replacement after five years of use. Prolonged use can lead to a lot of bacteria and dirt inside, which can cause damage to the human body over time. Therefore, the editor still suggests that we replace the faucet every five years.

Article source: Kaiping faucet http://www.clasito.net