1. Cleaning agent

Use the following cleaning agents to remove the thick legal mask and deposits: Wenwen liquid glass cleaning agent, pure liquid glass cleaning agent, acid free, non aggressive soft liquid or dissolved powder, and non conflicting solution polishing agent

2. Water puzzle surface

It should be wired fairly with a clean soft cloth dipped in cleaning agent frequently Avoid using metal wire balls or scoring cloths with hard particles Also, do not collect with hard objects to cause damage to the surface of the water noise

2. Correct maintenance methods

1. Construction

Personnel are required to carry out construction equipment When installing, the bathroom faucet should be kept away from hard objects as many as possible, and cement, glue, and other residuals should not be left on the surface to prevent damage to the surface coating cluster Be careful to install the bathroom faucet after removing fabrics from the pipeline

2. Daily use

Do not use too much force to turn on and off the bathroom faucet, just fairly roll along with the flow Even traditional bathroom faucets do not require a lot of effort to night Especially, do not use the handle as a handbook to support or use it

3. Screen cover

If the water pressure is not less than 0.02mpaz and after a period of use, if the water output decreases and the water heat stacks, the surface cover can be equitably unscrewed at the outlet of the faucet to remove impurities, which manually returns to the original state

4. Metal hosts

The metal host of the showerhead of the bathtub faucet should be brought here to the stretching condition, and should not be cooked around the faucet when not in use At the same time, when in use or not in use, be careful not to form a dead angle at the joint between the host and the valve body to prevent break or harm to the host

Article source: Kaiping Bathroom Faucet http://www.clasito.net