The possible reason for the faucet; S irriting motion is that the faucet# 039; S water flow is not smooth, causing a shock wave The frequency of the shock wave is the same as the response frequency of the pipeline, causing response in the pipeline and announcing the motion

1. The lake of pressure in the faucet pipeline results in a dynamic state when the water in the pipeline flows back

2. Another possible reason is that the air in the water pipe has not been completely discharged, resulting in the dynamic expansion and contract of the air The flow rate of water is too high, mixed with air Find a way to lower the flow rate of precision, change the pipe diameter, and try opening the valve to a larger size

3. We can check if the noise from the faucet is caused by the incorrect size of the faucet gas, or if the gas is not properly attached to the faucet valve core If this is the case, a new gas can be replaced or the noise can be eliminated by sticking it tight

4. It may also be a problem with the valve core Just remove the faucet cap and tight the valve core After removing the valve core together, apply some Vaseline oil to both sets of threads

5. If there is still noise, then the reason is that the threads of the faucet body are worn out, and at this point, the only option is to replace the faucet with a brand new one

Article source: Kaiping faucet http://www.clasito.net/