1、 Why did the Kaiping faucet break inside the wall?

Generally speaking, there are two main factors that can cause a faucet to break inside a wall: first, the quality of the faucet is not good, and second, improper force is used when disassembling. First, the quality of the faucet itself is not good, and coupled with the tight timing of the equipment, it is very easy to break when disassembling later. It is recommended that we purchase our faucets from standard building materials markets. When using the equipment together, it should be appropriate and not leak. 2. When disassembling, excessive force can cause the faucet to break inside the wall. Most of the elements are still too strong when disassembling. When disassembling, you can add a little liquid to the screw thread and wait for a while before disassembling.

2、 What should I do if the faucet breaks inside the wall?

The element that the faucet will break inside the wall has already been mentioned above.

1. First, use a saw blade to cut the faucet that is broken in the wall into three or four grooves, and then use a screwdriver to knock it out, and it&s okay.

But one thing to remind us is to be careful not to damage the threads inside the water pipe when sawing with a saw. When I was sawing, I made a groove on both the top, bottom, left, and right sides, causing some damage to the thread on the left side. It doesn&t matter much if I wrap it with PTFE tape.

2. Buying a hacksaw blade costs less than 1 yuan, averaging 4 yuan. Saw out four lines, then use a screwdriver and a hammer to knock out the inside, and it&s done in less than 20 minutes.

3. Go to a hardware store and buy something called a "thread extractor". Insert it into the broken thread, turn it counterclockwise, and use even force to remove the broken screw.

4. The commonly used screwdriver and pliers at home can be inserted into the broken thread and turned counterclockwise with even force to remove the broken screw.

Article source: Kaiping faucet http://www.clasito.net/