In today&s home life, bathrooms are equipped with a sink with dual hole hot and cold faucets as a bathroom item. The frequency of using a basin double hole hot and cold faucet in daily life has accumulated over time, and it can be used almost exclusively for washing. How much do we know about the equipment of the double hole cold and hot water faucet in the basin? What is the method for dual control faucet equipment, what are the techniques, and what are the precautions.

Equipment Skills

1. The interface of the water pipe

The interface between the faucet and the water pipe can be divided into "male" and "female", which means connecting one end with a screw or a nut. Equipment interface: Generally, single hole devices are used for kitchen sinks, and double hole devices are used for washbasins. The aperture and spacing of the holes are standardized, so you don&t have to worry about it yourself. From your picture, it appears that your column basin is a faucet using a double hole device, with two female hoses connected. Assuming you purchase the faucet alone, you don&t need to buy the water pipe separately. It seems that your washbasin doesn&t have a linked drain valve, just buy a regular faucet. If you need your own equipment, it is recommended to use some "raw tape" (also known as "raw tape") when buying a faucet. Wrap the equipment around the screw to avoid water leakage.

Two more high-pressure pipes need to be purchased for the dual hole basin faucet of the equipment. The equipment process of the double hole basin faucet is similar to that of the single hole basin faucet. The rubber gasket is separated and fitted with two inlet hoses, and the hoses are separated and connected to the inlet port of the basin faucet and the interface of the outlet angle valve.

2. Double hole faucet equipment

1. Single and double hole faucet: refers to the separate inlet of cold and hot water through two pipe holes, while the outlet flows out through one water nozzle. The water temperature is controlled by a handle to control it from left to right. Generally, the left side is hot water, while the right side is cold water. This type of valve, in practice, is a commonly used cold and hot water mixing valve.

2. Double handle double hole faucet: refers to the separate inlet of cold and hot water through two pipe holes, while the outlet is controlled by two valves and flows out through one water nozzle. The water temperature is controlled by two separate valves, and it is easier to control. Less practical use.

Equipment precautions

1. Equipment for shower and bathtub faucets

Assuming purchasing a shower, bathtub, or wall mounted faucet, it is necessary to choose a suitable height for buried water pipes. The interval between cold and hot water pipes is about 20 meters or more. Before using the equipment, flush the water pipes to avoid damaging the faucet due to the hard water quality.

2. Concealed shower and bathtub faucet

After purchasing a concealed faucet, it is generally necessary to embed the valve core of the faucet in the wall. Before embedding, the thickness of the bathroom wall should be considered. If the wall is too thin, the valve core will not be embedded. The plastic protective cover of the valve core during pre embedding should not be simple, to avoid damage to the valve core caused by cement and other miscellaneous matters during pre embedding. When embedding the valve core, attention should also be paid to the up, down, left, and right directions of the valve core to avoid incorrect embedding.

Article source: Kaiping faucet http://www.clasito.net/