The faucet is a hardware component that has been present since the availability of tap water, and it is also a household hardware component that we can no longer understand. But did you really install the right faucet at home? Originally, in many households, the equipment for faucets was not very standardized, and there were some problems to some extent. I have summarized five misconceptions. Let&s see if we have made such a mistake now?

Misconception 1: Different functional area equipment with the same type of faucet

There are various types of faucets, and according to different functional areas, there are mainly several types of faucets, such as basin faucets, bathtub faucets, washing machine faucets, and sink faucets. However, the structure and function of faucets in different functional areas are different. Faucets in basins, bathtubs, and bathtubs usually use two types: cold and warm faucets and frother faucets. For washing machine faucets, only a single cooling faucet is needed, Because the water flow of a single cooled faucet washes out quickly, it can achieve water conservation effects.

Misconception 2: The cold and hot water pipes are not separated

Usually, the mixing ratio of hot and cold water is controlled by the different opening angles at both ends of the ceramic valve core, in order to regulate the water temperature. If only a cold water pipe is needed, two inlet hoses can be connected to the cold and hot faucets of the equipment, and the corner valve on the equipment can also have an effect.

Misconception 3: The connection between the faucet and the water pipe did not use an angle valve

When connecting the hot and cold faucets at home with the water pipes, angle valves must be used to prevent water leakage from the faucet from affecting water use in other parts of the household. The faucet of the washing machine does not require hot water, so it can be directly connected to the water pipe.

Misconception 4: The faucet was not cleaned on time

Many households have never paid attention to the cleaning and maintenance of their faucets after installing them. Over time, not only is the water quality of the faucet not guaranteed, but various malfunctions may occur, affecting its use. Originally, the correct approach was to clean the faucet every month after it was installed. The surface stains and water stains should be wiped clean with a clean cloth. If thick scale accumulates inside, simply pour white vinegar into the faucet pipeline to soak for a while, then open the hot water valve to drain the water.

Misconception 5: The faucet was not replaced on time

Usually, faucets can be considered for replacement after five years of use. Prolonged use can lead to a lot of bacteria and dirt inside, which can cause damage to the human body over time. Therefore, the editor still suggests that we replace the faucet every five years.

Article source: Kaiping faucet http://www.clasito.net