If the faucet in the kitchen or bathroom is turned off slightly, it will also drive water, which is a great concern for most families Firstly, what drives are not water, but money As we all know living in high rise buildings, both electricity and water bills are paid On the other hand, if one day the waterway gets blocked, the house is none to numerical floods When sleeping at night, the ticketing sound is very conflicting What should we do when we Encounter such a situation?

Firstly, the water supply must be sealed off. Zhu Xu can close the water supply valve near the faucet to close the water supply, but if not every faucet is required with a water supply valve, he needs to turn off the main water supply valve to close the water supply to your home

Step: Close the water supply, remove the handle or small screw at the back of the faucet, and remove the handle on the main body of the faucet Some screws are hidden under metal buttons, plastic buttons, or plastic sheets that are stuck or scratched into the handle You just need to flip the button open and you will see the handle screw installed at the top

Step, remove the handle and inspect the components of the faucet Remove the packing nut and be careful not to leave scratches on the metal Rotate the valve core or shaft rewards the direction of opening the faucet to unscrew them

Step 3, remove the screws that secure the washer Check the screws and valve core, and replace them with new ones if there is any damage A typical press type valve core faucet handle will be sealed with a gasket when rotated Most leaks are caused by damaged gaps

Step 4, replace the old game with a new one A new gas that perfectly matches the old gas can generally prevent the faucet from dripping water again Also pay attention to which the old game has a slope or is flat, and replace it with the same new game Waters designed only for cold water will experience multiple swings and blockages of the outlet when hot water flow expires, causing slow flow of hot water Some games can be operated in hot and cold water, but you should make sure that the games you buy for replacement are identical to the original ones

Step 5, fix the new gas on the valve core, and then install the various components in the faucet from the beginning Rotate the valve core clockwise After the valve core is in place, install the packing nut from the beginning Be careful not to leave scratches on the metal with the writing

Step 6: Install the handle from the beginning and replace the button or disc Turn on the water supply from the beginning and check for any leaks

Faucet valve seat: Dripping occurs when the faucet is closed; Leakage is caused by expired water flow in the faucet If you see water gushing out from around the handle, the faucet is leaking; The first thing to do is to make sure that the sealing nut of the faucet is tight, but be careful not to scratch the nut with suppliers or writers

Article source: Kaiping faucet http://www.clasito.net/