The faucet is closely related to our daily life. When using the faucet alone, water splashes. Assuming a layer of faucet filter is added, there will be no appearance of water splashing. However, if the faucet filter screen is used for a long time, a layer of impurities will appear on the filter screen, and the faucet will not be very unobstructed, resulting in a decrease in water flow. So, the filter screen of the faucet is blocked, how should we clean and replace it?

Although faucet filters are often used in every household, do you know that faucet filters can accumulate many impurities in accumulated water due to frequent use? Over time, there will be a layer of sediment attached to it, making it difficult to clean. If not cleaned in time, it will block the faucet and even cause the faucet filter to be washed away. So, we need to clean in a timely manner, remove debris, and adhere to the dredging of the faucet filter.

Firstly, it is important to prepare a spare filter at home. This type of filter is very affordable and can be purchased online or from a hardware store. We can store a few more at once for timely replacement, which is very convenient. When removing the filter screen from the faucet again, the thing to be used is to flip the faucet open from the end position of the device, so that the filter screen can be easily removed. When installing a new filter, it is necessary to follow the instructions provided in the application. Perhaps you can carefully inquire with the dealer when making a purchase.

How should we clean the filter screen of the faucet as usual?

1. Regularly clean the faucet and filter according to household practice.

2. There are two flat surfaces at the outlet of the faucet that can be twisted with a wrench. That is, unscrew the faucet and take out the filter inside. First, rinse with clean water, and then gently rinse with a toothbrush dipped in warm liquid cleaner or toothpaste.

3. The filter can also be soaked in white vinegar for 4-6 hours, and then rinsed with clean water to remove scale.

4. When cleaning the stains on the surface of the faucet, a neutral cleaning agent is usually used to clean the coating surface, and then a clean soft cloth is used to wipe it dry. Try not to use strong cleaning agents such as detergent or toilet cleaner, as they are often rich in mineral particles that can pose a hazard to the electroplated surface.

5. When tidying up the surface of the faucet, you can also wipe it with a lemon slice a few times to make it shiny as new.

Article source: Kaiping Bathroom Faucet http://www.clasito.net/