I believe everyone knows that the slightly damaged part of a faucet is the valve core, so mastering its replacement skills is still very important. Once a faucet leaks, it not only wastes water resources, but also the sound of water droplets and the long-term impact on space humidity can affect the health of family members. So when there is a problem with the faucet valve core, how can the faucet valve core be replaced?

Replacement method for faucet valve core:

1. First, close the main water valve

2. Then remove the red and blue mark on the handle of the faucet, which is about 8mm in size

3. Use a flat screwdriver to loosen the fixing screw counterclockwise, remove the handle, and expose the valve core

4. Use a wrench to open the valve core of the faucet, flip open the upper part of the pressure cover with a wrench, and take out the ceramic valve inside

Precautions for replacing faucet valve core

1. After removing the valve core, you will see a blue rubber ring at the bottom of the valve core. Generally, the bottom of the left valve core is red rubber, while the right valve core is blue rubber.

2. So when replacing the valve core on the right, use a blue rubber valve core. After installing the valve core, insert the handle and adjust the direction of the handwheel. When the handle is facing both ends, it is turned off, and when standing, it is boiled water.

3. Install the screws and cover the blue cover on the right, so that the new valve core is replaced.

What material is good for the valve core of the faucet

1. The stainless steel valve core can be said to belong to a relatively high-tech product, for example, if the choice of stainless steel material is not good enough, rusting may occur.

2. Ceramic valve core is a good type of valve core nowadays. Products made of this material have strong properties, good sealing, and a relatively long service life. It is also a widely used good product.

3. The valve core of a faucet is its heart part, so when choosing its quality, it is important to consider whether its valve core is good or not. Common valve cores can also be divided into stainless steel valve cores, copper valve cores, and ceramic valve cores.

4. Copper valve core is a relatively expensive material, and the same material also has higher quality requirements. Otherwise, it may accumulate scale in the future.

Article source: Kaiping faucet http://www.clasito.net